Electromagnetic Flowmeter With Integral

Flowmeter Range: Dn25-Dn300 (Above 300mm On Request Up To 1500mm)

Inquiry

Electromagnetic Flowmeter / Magmeter / flowmeter

An Electromagnetic flowmeter with integral is manufactured with state of the art technology. A magnetic flowmeter (magmeter, flowmeter) is a transducer that measures fluid flow by the voltage induced across the liquid by its flow through a magnetic field. Microcontroller based design provides precise measurement. electromagnetic flowmeter works on the principle of Faraday’s low of electromagnetic induction.

Specification

Diameter	PTFE:DN6-DN600, Neoprene/ Hard rubber: DN50-DN 2200, Sanitary Type: DN10-DN100.
Accuracy	±0.5% of rate; ±0.2% of rate
Velocity	0.3-10m/s
Electrical conductivity	>= 5 µS/ cm.
Flow Direction	Forward or reverse (Programmable)
K- factor	Present.
Flow unit	Programmable
Repeatability Error	±0.1%
Display	16/2 LCD for flow rate & totalizer.
Communication	RS 485 / RS 232 (Optional on request)
Power supply	220 Vac / 24 Vdc / 110 V ac / 415 Vac
Operating Temperature	Hard rubber/ Neopren liner:-20 …+60℃ PTFE liner: -20…+140℃ High-temp PTFE liner: -2O…+ 18O℃ PFA: -20 …+180℃
Nominal working pressure	10 BAR standard. ( > 10 BAR on request.)
Memory	Inbuilt nonvolatile
Output	4-20 mA isolated, Pulse (On request), Relay
Empty pipe detection	Yes